Underfloor heating works best in winter when you leave it running steadily at a comfortable temperature, with a small drop at night, rather than switching it fully on and off like radiators. A floor takes hours to warm up and cool down, so short blasts waste energy and leave rooms cold when you want them warm. Set it, leave it and let the thermostat do the work. We fit and look after underfloor heating in homes across Kent and South London, often alongside a new boiler installation in Sevenoaks or nearby.
Why underfloor heating behaves differently
Radiators run hot and heat a room quickly. Underfloor heating runs much cooler and spreads gentle heat across the whole floor. In a wet system, warm water flows through pipes laid in a screed or under floor panels. That mass takes a long time to warm up, but it also holds heat well.
The result is that the habits most people have from radiators, like turning the heating on when they get home, don’t suit it. A slab of screed might take several hours to reach temperature from cold.
Settings that work in cold weather
- Pick a steady room temperature. Choose a comfortable setting on each room thermostat and leave it.
- Use a setback, not off. Many thermostats let you set a lower night or away temperature, a few degrees below your daytime setting. That stops the floor going stone cold and avoids a long warm-up the next day.
- Start the morning warm-up early. If your controls don’t learn your routine, bring the morning start time forward so rooms are warm when you get up.
- Keep doors closed between zones. Each zone is controlled separately, and a cold hallway can pull heat from a warm room.
- Avoid the boost habit. Turning the thermostat right up won’t make the floor heat faster. It just overshoots later.
If you want to control zones from your phone or set schedules room by room, our smart homes page covers the kind of controls that can help.
Floor coverings matter
What sits on top of the pipes affects how much heat reaches the room. Stone and tiles let heat through easily. Thick carpet and heavy underlay hold it back. Large rugs, beanbags and furniture with solid bases sitting flat on the floor can create cold spots and make rooms feel slow. If you’ve changed flooring since the system was installed and a room no longer feels warm, that may be why.
When your underfloor heating needs a check
Some issues are worth an engineer’s visit:
- One zone stays cold while the others heat
- The whole system takes much longer to warm up than it used to
- Pressure on the boiler or the manifold gauge keeps dropping
- Air noises or gurgling from the manifold
- A thermostat that shows heat being called for but the floor stays cool
Common causes include a sticking actuator on the manifold, a failed zone thermostat, air in the loops, a pump fault or the flow rates needing rebalancing. Don’t open the manifold or drain loops yourself. Our heating repairs team can diagnose wet underfloor systems as well as radiators.
Underfloor heating in Sevenoaks and Tonbridge homes
Around Sevenoaks and Tonbridge, we see plenty of kitchen extensions and garden rooms with underfloor heating, often on a separate zone from the radiators in the older part of the house. Large areas of glass in those extensions lose heat quickly on cold nights, so the floor has more work to do. A good setback temperature and sensible start times make a big difference. If you’re still deciding whether to have it fitted, our article asking is underfloor heating worth it covers the pros and cons.
Frequently asked questions
Should I leave underfloor heating on all the time in winter?
For most wet systems in a screed floor, yes, in the sense of keeping it running at a steady temperature with a lower setback at night or when you’re out. Switching it fully off and back on makes the floor start from cold every time, which is slow and can use more energy overall.
What temperature should underfloor heating be set to?
Set the room thermostat to a temperature you find comfortable, then leave it. Many people find they can set it a little lower than with radiators, because the heat is spread evenly. The water temperature in the pipes is set during installation and shouldn’t need changing by the homeowner.
Why is my underfloor heating slow to warm up?
Wet systems in screed are naturally slow, often taking a few hours from cold. If it’s slower than it used to be, a stuck actuator, air in the pipes, low pressure or a flow problem at the manifold could be the cause. Thick new flooring can also slow things down noticeably.
Floors not warming up?
If your underfloor heating isn’t keeping up this winter, give us a call on 020 3722 5095 or drop us a message and we’ll check the system and get every zone working properly.